Furuno FS-1570 - Manual (Page 67)

5. CALLING, RECEIVING
5-5
6. Rotate the [ENTER] knob to choose appropriate priority (normally ROUTINE) and then
push the [ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE menu.
CALL TYPE
STATION ID
PRIORITY
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: ROUTINE
: NO INFOR
: 2M-INTL
TELEPHONE
NBPD-ARQ
NBDP-FEC
Routine or
Business Priority For Safety or
Urgency Priority
COM. TYPE :
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
DATA
#
MAIN
V32
V21 V26 BIS
V22 V26 TER
V22 BIS V27 TER
V23
TELEPHONE
NBDP-ARQ
NBDP-FEC
$
SPECIAL
Push [ENTER]
knob to display.
** Compose message **
8. Rotate the [ENTER] knob to choose communications type desired and then push the
[ENTER] knob.
9. Push the [ENTER] knob to open the COM. FREQ menu.
CALL TYPE
STATION ID : 123456789
PRIORITY
COM. TYPE
DSC FREQ
: INDIVIDUAL
: 12M-INTL
COM. FREQ
FREQUENCY
CHANNEL
POSITION*
NO INFO
GO TO ALL VIEW
* POSITION is displayed if a coast
station is specified at step 3.
** Compose message **
10. Rotate the [ENTER] knob to choose communication frequency setting method desired
and then push the [ENTER] knob. For FREQUENCY and CHANNEL, see “How to Set
Working Frequency, Channel” below. NO INFO and POSITION let the receiving station
set the working frequency. Choose NO INFO or POSITION to send the call to a coast
station; FREQUENCY or CHANNEL to send the call to a ship station.