Furuno FS-1570 - Manual (Page 120)

7 DSC/WATCH RECEIVER SETUP
7-2
7.2 Alarm Menu
The Alarm menu enables/disables internal and external alarms. Note that the
Distress/Urgency alarm cannot be disabled. Press the [#/SETUP] key, choose ALARM and
then push the [ENTER] knob to display the Alarm menu.
**** Alarm setup ***
INTERNAL AUDIO ALARM
RCVD CALL
OLD POSITION
POSITION OLDER
EXT ALARM : DSTRS/URG
: ON
: ON
: 4.0 H
OFF
OFF
3.0
2.0
1.0
0.5
4.0
ROUTINE
ALL
OFF
DSTRS/URG
35˚00.000N 135˚00.000E 23:59
WATCH KEEPING
2187.5 4207.5 6312.0
8414.5 16804.5 12577.0
DISTRESS
ROUTINE
2177.0 4219.5 6331.0
16903.0 12657.0
VOLUME
Warning:
Update position
Default: ON
Default: ON
Default: 4.0 hours
Default: DSTRS/URG
Disables/enables alarm for received Safety,
Ship's Business and Routine calls.
Alarm is output when position is older by the
number of hours set here.
Sets type of call to be output to the
Incoming Indicator IC-303-DSC.
DSTRS/URG: Distress or urgency
call output upon receipt.
ROUTINE: Routine call output
upon receipt.
ALL: All calls output.
OFF: No output.
Note: Alarm for Distress and Urgency calls
cannot be disabled, and its sound level
is fixed at 75-85 dB.
Note: Authorities require that position be
updated at least every four hours.
22
AUTO ACK
8436.5
Disables/enables old position alarm in manual
position entry mode, which alerts the operator
when position data is older by the number of
hours or minutes set in the Position Older field.
Message shown when position is
older than the time set on the
Alarm setup menu.
Rotate
[ENTER]
knob to choose.
Rotate
[ENTER]
knob to choose.
Rotate
[ENTER]
knob to
choose.
Rotate
[ENTER]
knob to choose.
ON
ON