Furuno FS-1570 - Manual (Page 76)

5 CALLING, RECEIVING
5-14
Manually acknowledging individual call with “UNABLE”
1. When an individual call is received, the alarm sounds and the display shows the
message "Individual request call received."
Individual request
call received.
FROM SHIP: 121234567
ROUTINE
TELEPHONE CH 12034
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
INDIVIDUAL REQUEST
FROM SHIP: 121234567
ROUTINE
TELEPHONE CH 12034
* Received message *
ANSWER
! "
ALL VIEW
MAR-23-2002-23:00:00 ECC: OK
To view contents, rotate [ENTER] knob
to choose ALL VIEW and push the
[ENTER] knob..
3. Rotate the [ENTER] knob to choose ANSWER and then push the [ENTER] knob.
4. Push the [ENTER] knob to open the CALL TYPE menu.
TO SHIP : 001234567
COM. TYPE : TELEPHONE
COM. FREQ : CH12034
CALL TYPE : ABLE
ACKNOWLEDGEMENT
DSC FREQ: 1 2577.5 KHZ
GO TO ALL VIEW
ABLE
UNABLE
** Compose message **
5. Rotate the [ENTER] knob to choose UNABLE and then push the [ENTER] knob.
6. Push the [ENTER] knob. The display then prompts you to choose the reason you are
unable to acknowledge the call.
DSC FREQ : 12,577.5 KHZ
CALL TYPE : UNABLE
REASON : NO REASON
TO SHIP : 001234567
ACKNOWLEDGEMENT
GIVEN
NO REASON
BUSY
EQUIP DISABLED
MODE NOT USABLE
CH NOT USABLE
** Compose message **
7. Rotate the [ENTER] knob to choose an appropriate reason and then push the [ENTER]
knob.
8. The display changes as below.