FUJITSU DL9300 - Manual (Page 87)

PRINTING
4-2 User's Manual
STARTING OR STOPPING
PRINTING Starting Printing
To start printing, press the ONLINE button to place the printer
online. Then start your software.
Stopping Printing
To stop printing immediately, press the ONLINE button to place the
printer offline. You can also use your software to stop printing, but
there will be a slight delay before printing stops. Any data sent to the
print buffer but not yet printed is stored until you resume printing.
Data in the print buffer is lost if you turn the printer off.
To resume printing, press the ONLINE button again. To cancel
printing, use the cancel commands provided by your software or
computer. To clear the print buffer, place the printer offline and press
the LOAD and LF/FF buttons. Any data sent to the print buffer
before you canceled printing will be lost.