FUJITSU DL9300 - Manual (Page 179)

C-2 User's Manual
COMMAND SETS (DPL24C PLUS)
FUJITSU DPL24C PLUS This section describes the printer commands for the DPL24C PLUS
command set which is the native command set of this printer. See the
Programmer’s Manual (DPL24C PLUS) for detailed information on
using these commands.
Function Command
Print Mode Control
Double-strike (bold) printing on
ESC G
Double-strike (bold) printing off ESC H
Emphasized (shadow) printing on ESC E
Emphasized (shadow) printing off ESC F
Italic printing on ESC 4
Italic printing off ESC 5
Select character style and screening ESC e S (n
1
) (n
2
)
n
1
= 0: Normal
1: Outline
2: Shaded
3: Outline and shaded
4: Thin outline
5: Thin shaded
6: Thin outline and shaded
n
2
= 0: Transparent
1: Light dot matrix
2: Heavy dot matrix
3: Vertical bars
4: Horizontal bars
5: Slants
6: Back slants
7: Lattice
One-line double width characters on SO or ESC SO
One-line double width characters off DC 4
Double width characters on/off ESC W (n)
(on: n = 1, off: n =0)