FUJITSU DL9300 User Manual
Page 15
User's Manual
QR-2
QUICK REFERENCE
Printer Operations (Normal Mode)
√
: Operation can be performed when the printer is in this state.
—
: Operation cannot be performed when the printer is in this state.
N/A : Does not apply.
Operation
Clear print buffer
Eject single sheets
Enter normal mode
Enter setup mode
Exit to normal mode
Form feed (forward)
Line feed (forward)
Load paper
Micro feed (backward)
Micro feed (forward)
Place printer offline
Place printer online
Reset power-on defaults
Resume printing after paper end
Save adjusted load positions
Start/stop/resume printing
Select a paper input source
Select a paper feed direction
Self-test printing
Set/reset multi copy mode
Tear off forms
(continuous forms only)
Unload paper to park position
(both front and rear-fed
continuous forms)
Required Response
Press LOAD and LF/FF.
Press LF/FF.
Turn printer on. (Press 1 on the power switch.)
Press
↑
MICRO and
↓
MICRO.
Press ONLINE, then press
↑
MICRO or
↓
MICRO.
Press and hold LF/FF until the operation starts.
Press LF/FF within three seconds.
Press LOAD.
Press
↑
MICRO.
Press
↓
MICRO.
Press ONLINE.
Press ONLINE.
Turn printer off, then on.
Press ONLINE.
Press ONLINE and LOAD.
Start: Send print command.
Stop/resume: Press ONLINE.
Press PAPER PATH.
Press FRONT DIR.
Start: Turn printer off. Press LF/FF while turning
printer on.
Pause/resume: Press
↑
MICRO and
↓
MICRO.
Exit: Press ONLINE.
Press MULTI COPY.
Press TEAR OFF. Tear off forms, then press any
button to retract forms.
Press LOAD.
Offline
√
√
N/A
√
√
√
√
√
√
√
—
√
√
—
√
—
√
√
√
√
√
√
Online
—
√
N/A
—
—
√
√
√
√
√
√
—
√
√
√
√
√
√
√
√
√
√