FUJITSU DL9300 - Manual (Page 161)

TROUBLE-SHOOTING
7-8 User's Manual
Table 7.3 Operating Problems and Solutions (Cont.)
Problem Solution
The printer is on If you are using an RS-232C serial interface,
but it will not make sure that the serial settings required by
print (continued). your software or computer are the same as the
settings on the printer. See the section Hard-
ware Items and Options
in Chapter 5.
The cut sheet Make sure that the cut sheet feeder is firmly
feeder does not mounted on the printer.
operate.
Make sure that the cable is correctly connected.