FUJITSU DL9300 - Manual (Page 165)

8-2 User's Manual
INSTALLING OPTIONS
• When attaching the cut sheet feeder to the front of the
printer, remove the tractor unit and put the paper table in
the normal position (horizontal).
• When attaching the cut sheet feeder to the rear of the
printer, put the rear stacker in its lower position.
• For both front and rear, the cut sheet feeder can handle a
max. of 5-ply multipart media.
• When installing the front and rear cut sheet feeders, the
printer assigns the first bin to the front feeder. You can
change the assignment using set up mode.
A tractor unit is supplied as standard equipment attached to the
front of the printer. A max. of 8-ply media may be fed from the
front by the tractor unit.
This unit may also be attached to the rear of the printer for rear
feeding of continuous forms.
However, a max. of only 6-ply media may be fed from the rear by
the tractor unit.
Tractor unit
INSTALLING THE
TRACTOR UNIT