FUJITSU DL9300 - Manual (Page 118)

Setup Mode
USING SETUP MODE
User's Manual 5-27
The HARDWRE function defines the printer’s hardware operating
conditions. If you are using the RS-232C serial interface, the serial
interface options must be set properly for the printer to function
correctly with your system hardware.
Table 5.4 describes the HARDWRE items and options . Items are
listed in the order in which they are printed. The procedure for
changing the options is reffered to Setup Mode Example.
Table 5.4 HARDWRE Items and Options
NOTE: Underlined options are the factory defaults.
Specifies how the printer responds
when you run out of paper.
CNTONLY The printer detects paper-out only
for continuous forms. Printing stops
and the PAPER OUT indicator
lights red.
DETECT The printer detects paper-out for
both continuous forms and single
sheets. Printing stops and the
PAPER OUT indicator lights red.
IGNORE The printer ignores paper-out for
both continuous forms and single
sheets. Printing continues until no
more data remains. No PAPER
OUT warning is displayed.
NOTE: For cut sheet feeders, printing
stops and the PAPER OUT indicator
lights red, regardless of the PPR-OUT
setting.
HARDWRE
Items
Options Description
HARDWARE ITEMS AND
OPTIONS