FUJITSU DL9300 User Manual
Page 121
USING SETUP MODE
User's Manual
5-30
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Description
Items
Number of
Number of
data bits
Parity bit
stop bits
7SPACE 1
7
Space
1
7EVEN 2
7
Even
2
7ODD 2
7
Odd
2
The data format also includes a start
bit. The mark is logical 1. The space
is logical 0.
The baud rate is in bps (bits per
300
second). Select the same baud rate as
600
used by your computer or modem.
1200
2400
4800
9600
19200
Indicates data transmission protocol.
XON/XOF
The DC1 and DC3 codes are used.
DTR
The Data Terminal Ready signal is
used.
REV-CHL
The Reverse Channel signal is used.
IGNORE
DSR is ignored by the printer.
DETECT
DSR is detected by the printer.
FULL
Simultaneous data transmission occurs
in opposite directions.
HALF
Data transmission occurs in either
direction, but not simultaneously.