FUJITSU DL9300 - Manual (Page 30)

Setting Up
SETTING UP
User's Manual 2-11
Ribbon feed knob
Turn clockwise to tighten.
Ribbon release tabs
Ribbon release lever
Mounting pin
2. Rotate the paper thickness indicator upwards until head gap is
at maximum R.
Move to R
Preparing the printer to install the ribbon cartridge
3. Remove the ribbon cartridge from its package. Push in the two
ribbon release tabs. The tabs snap into the cartridge and the
ribbon feed mechanism engages.
Turn the ribbon feed knob clockwise to be sure that it feeds
properly.
Preparing the ribbon cartridge