FUJITSU DL9300 - Manual (Page 129)

USING SETUP MODE
User's Manual 5-38
Table 5.6 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG Items Options Description
POST-loading status in offline mode.
OFF LINE Remains offline after paper loading.
ONLINE Goes into online after paper loading.
Ejection direction.
FRONT Front ejection. FRONT indicator
lights.
REAR Rear ejection. FRONT indicator
does not light.
Printing pressure.
SINGLE Standard printing pressure. MULTI
indicator does not light.
MULTI High printing pressure. MULTI
indicator lights.
CSF frist bin assignment when
installing the front and rear cut
sheet feeder.
FRONT Assigns the first bin to the front CSF.
REAR Assigns the first bin to the rear CSF.
Paper sensor position for front
feeding.
POSN1 Set the paper sensor to position1,
when paper width is under 70 mm.
POSN2 Optional sensor position.
NOTE:
The values of position 1 and 2 are fixed.
<==END==> Indicates the end of the CONFIG
item list. Press the
↓
MICRO button
to print the first item, which is
.
Press the
↑
MICRO button to print
the previous item. Press the
ONLINE button to reprint the
<> menu.