FUJITSU DL9300 - Manual (Page 5)

ABOUT THIS MANUAL
Thank you for buying the Fujitsu DL9300/9400 dot matrix printer. You
can expect years of reliable service with very little maintenance. This
manual explains how to use your printer to full advantage. It is
written for both new and experienced printer users.
This manual describes how to install, set up, and use your printer and
printer options. It also explains how to keep the printer in good
working condition and what to do should something go wrong.
Detailed procedures are provided for first-time users. Experienced
users can skip some of the details, using the table of contents and
chapter introductions to locate information.
This manual has several appendixes, a glossary, and an index.
Appendix A lists supplies and additional documentation and
information available from your dealer or authorized Fujitsu
representative. Fujitsu offices are listed at the end of the manual.
This manual covers model DL9300, an 80-column printer, and model
DL9400, a 136-column printer. Each model has a 100-120 VAC or 220-
240 VAC power supply. You must specify these when purchasing the
printer. Other options include a cut sheet feeder which can be added
by yourself after purchasing the printer.
Unless otherwise stated, the information given here applies to both
models. All illustrations are of the DL9300/9400.
DL9300/9400
Basic specifications
Print line at 10 cpi: 80 columns (DL9300)
136 columns (DL9400)
Interface: Dual (Contro+KS232C)
Alternative specification
Power supply: 100–120 VAC or 220–240 VAC
Factory add-on option
Front cover (visible type)
User add-on options
Cut sheet feeder
Tractor unit
cpi: characters per inch
PRINTER MODELS AND
OPTIONS