FUJITSU DL9300 - Manual (Page 97)

USING SETUP MODE
User's Manual 5-6
To select an option from the menu:
1. Repeatedly press the “
←
” or “
→
” button to position the red
cursor on the plastic print guide on the option you require.
2. Press the “
↓
” button to select the option. The printer prints the
next item and its options. You can press “
↑
” to select the
option. Then, the printer prints the previous item and its
options.
3. After selecting the desired options, press the ONLINE button
to reprint the <> menu.
For each item, the short-underlined option is the current
default option (the option currently saved in the printer’s
permanent memory). In the previous example, the default
options are Fujitsu DPL24C PLUS emulation, Courier 10 font,
and letter print quality.
The chart on the next page summarizes how to select options such
as emulation, font, and print quality and how to use functions that
do not have options.
Setup Mode Example
To become familiar with setup mode, try the following example. This
example shows how to change the font and pitch in MENU2 to
Prestige Elite 12 and 12 cpi.
1. Load continuous forms paper.
2. Enter setup mode.
Press the
↑
MICRO and
↓
MICRO buttons simultaneously until
the printer beeps.
3. Select the MENU2 function.
Wait for the printer to stop printing and press the “
←
” or “
→
”
button twice to position the red cursor on the print guide
under MENU2. Press the “
↑
” button or the “
↓
” button to
select the MENU2 function and print the item
and its options.