beautypg.com

FUJITSU DL9300 User Manual

Page 119

background image

USING SETUP MODE

User's Manual

5-28

Table 5.4 HARDWRE Items and Options (Cont.)

NOTE: Underlined options are the factory defaults.

HARDWRE
Items

Options

Description

BI-DIR

Bidirectional printing. The printer
prints in either direction while
seeking the next print direction for a
shorter print time.

UNI-DIR

Unidirectional printing. Unidirectional
printing is used for printing vertical
lines in tables even if vertical alignment
is not adjusted. Unidirectional printing
is slower than bidirectional printing.

Enables or disables the printer status
buzzer.

ON

Buzzer on (recommended).
The printer beeps to indicate paper-
out or other conditions.

OFF

Buzzer off under any conditions.

To determine the required word
length, refer to your computer
documentation. Select 8-BIT to print
bit image graphics.

8 BIT

8-bit word length (used by most
computers)

7 BIT

7-bit word length (MSB = 0)

Assigns buffer memory to input data
and downloaded font data.

Print buffer

Download buffer

NONE

0 byte

96K bytes

256BYTE

256 bytes

95.75K bytes

2KBYTE

2K bytes

94K bytes

8KBYTE

8K bytes

88K bytes

24KBYTE

24K bytes

72K bytes

32KBYTE

32K bytes

64K bytes

96KBYTE

96K bytes

0K bytes

This manual is related to the following products: