FUJITSU DL9300 - Manual (Page 50)

Setting Up
SETTING UP
User's Manual 2-31
3. Select the MENU1 function.
Locate the red cursor (two red lines) on the plastic print guide.
Initially, this cursor should be positioned on SAVE & END at
the beginning of the <> menu. Press the
←
or
→
button repeatedly to position the cursor on MENU1, as shown
below:
Press the
↑
button or the
↓
button to select MENU1 and print the
following options:
The currently selected emulation is indicated by a short under-
line. In the figure shown above, the Fujitsu DPL24C PLUS
emulation is selected.
4. Select an emulation.
Press the
←
or
→
button repeatedly to position the cursor under
the required emulation. Press the
↑
button to select the emula-
tion and print the next MENU1 item.
Print guide
Cursor
(red lines)
DPL24C+ XL24E ESC/P2