FUJITSU DL9300 - Manual (Page 82)

User's Manual
Paper
Handling
PAPER HANDLING
3-25
FEEDING AND POSITIONING
PAPER Line Feed/Form Feed
Use the line feed/form feed function to move paper forward. Pressing
and holding down the LF/FF button feeds one sheet of paper. Press-
ing the LF/FF button once advances the paper one line (do not hold
the button more than three seconds).
Micro Feed
Use the micro feed function to fine tune the position of the paper.
Press the
↑
MICRO/
↓
MICRO button to feed paper by 1/180 inch in the
direction of the arrow.
Remember that the top-of-form will slip from the original setting.
Load Position Adjust
Use also the micro feed function to adjust the load position of the
paper. When this function is used immediately after the LOAD button
is pressed, the adjusted position is retained as the new load position
until the power is turned off. Pressing the ONLINE␣and LOAD
buttons simultaneously saves the new position permanently.