FUJITSU DL9300 - Manual (Page 64)

User's Manual
Paper
Handling
PAPER HANDLING
3-7
Setting *2
USING SINGLE
SHEETS
*1 For carbon-interleaved paper, the carbon counts as one copy.
*2 Vary the setting up or down (including
A to R ) to optimize
printing. Select R when replacing a ribbon or clearing a paper
jam. For labels and envelopes, use trial-and-error to determine
a satisfactory setting.
This section describes how to load paper from the paper table or cut
sheet feeder. The paper table allows paper to be loaded manually, one
sheet at a time. A cut sheet feeder allows paper to be loaded automati-
cally from the paper bin.
Loading a Single Sheet of Paper
To load a sheet of paper from the paper table:
1. Make sure that the printer is turned on.
2. Press the PAPER PATH button to select CUT SHEET (the
indicator lights).
3. Put the paper table in the nomal position (horizontal).
Table 3.2 Paper Thickness Indicator Settings
Number of Copies
(Including the Original) *1
1 copy 1
2 copies 2
3 copies 3
4 copies 4
5 copies 5
6 copies 6
7 copies 7
8 copies 8
Envelops A
Slips B, C, D
Ribbon replacement R