FUJITSU DL9300 - Manual (Page 191)

C-14 User's Manual
COMMAND SETS (DPL24C PLUS)
IBM PROPRINTER XL24E
EMULATION This section describes the printer commands for the IBM Proprinter
XL24E emulation. Asterisks in the “Function” column indicate
extended commands that are not supported by the original printer.
Function Command
Print Mode Control
Double-strike (bold) printing on
ESC G
Double-strike (bold) printing off ESC H
Emphasized (shadow) printing on ESC E
Emphasized (shadow) printing off ESC F
One-line double-width characters on SO or ESC SO
One-line double-width characters off DC4
Double-width characters on/off ESC W (n)
(on: n = 1, off: n = 0)
Double-height/double-width characters
ESC [ @ (n
1
) (n
2
)
n
1
= 4, n
2
= 0, m
1
= 0, m
2
= 0 (m
1
) ... (m
4
)
m
3
controls character height and line
spacing:
m
3
Height Spacing
0 Unchanged Unchanged
1 Normal Unchanged
2 Double Unchanged
16 Unchanged Single
17 Normal Single
18 Double Single
32 Unchanged Double
33 Normal Double
34 Double Double
m
4
controls character width:
m
4
Width
0 Unchanged
1 Normal
2 Double
COMMAND SETS (IBM XL24E)