Appendix c command sets – FUJITSU DL9300 User Manual

Page 178

Text mode
Original mode

C-1

Command

Sets

User's Manual

COMMAND SETS

COMMAND SETS

This appendix describes printer commands and
their parameters.

This printer has three resident command sets:

• Fujitsu DPL24C PLUS (native command set for Fujitsu DL

series printers)

• IBM Proprinter XL24E
• Epson ESC/P2

Separate programmer’s manuals are available for these emulations.
See Appendix A for order information.

Select the same emulation on the printer and in your software. If your
software emulations include DPL24C PLUS, select DPL24C PLUS for
optimum performance.

This manual is related to the following products:

DL9400