ABAQUS Volume II: I–Z - Manual (Page 55)

*INCREMENTATION OUTPUT
9.15 *INCREMENTATION OUTPUT: Define output database requests for time
incrementation data.
This option is used to write incrementation variables to the output database. It must be used in conjunction
with the *OUTPUT, HISTORY option.
Product: ABAQUS/Explicit
Type: History data
Level: Step
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
*OUTPUT
Optional parameter:
VARIABLE
Set VARIABLE=ALL to indicate that all incrementation variables applicable to this procedure type
should be written to the output database.
Set VARIABLE=PRESELECT to indicate that the default incrementation output variables for
the current procedure type should be written to the output database. Additional output variables can
be requested on the data lines.
If this parameter is omitted, the incrementation variables requested for output must be specified
on the data lines.
Data lines to request incrementation output:
First line:
1. Give the identifying keys for the variables to be written to the output database. The
keys are defined in “ABAQUS/Explicit output variable identifiers,” Section 4.2.2 of the
ABAQUS Analysis User’s Manual.
Repeat this data line as often as necessary to define the time incrementation variables to be written to
the output database.
9.15–1
ABAQUS Version 6.1 Module: ID:
Printed on: