ABAQUS Volume II: I–Z - Manual (Page 201)

*NO TENSION
14.6 *NO TENSION: Introduce a tension failure theory (compression only material).
This option is used to modify the elasticity definition so that no tensile stress is allowed. It can be used only
in conjunction with the *ELASTIC option.
Product: ABAQUS/Standard
Type: Model data
Level: Model
References:
•
“No compression or no tension,” Section 17.2.2 of the ABAQUS Analysis User’s Manual
•
*ELASTIC
There are no parameters or data lines associated with this option.
14.6–1
ABAQUS Version 6.1 Module: ID:
Printed on: