ABAQUS Volume II: I–Z - Manual (Page 255)

*PERMEABILITY
6. .
7. Void ratio, e.
8. Temperature, .
Subsequent lines (only needed if the DEPENDENCIES parameter is specified):
1. First field variable.
2. Second field variable.
3. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the variation.
Data lines to define the dependence of permeability on saturation of the wetting liquid, k
s
(s)
(TYPE=SATURATION):
First line:
1. . (Dimensionless.)
2. Saturation, s. (Dimensionless.)
Repeat this data line as often as necessary to define the variation. The table must provide at
.
Data lines to define the velocity coefficient, b (e) (TYPE=VELOCITY):
First line:
1. . (Units of TL
−1
.) Only is allowed.
2. Void ratio, e.
Repeat this data line as often as necessary to define the variation.
16.6–3
ABAQUS Version 6.1 Module: ID:
Printed on: