ABAQUS Volume II: I–Z - Manual (Page 229)

*OUTPUT
15.3 *OUTPUT: Define output requests to the output database.
This option is used to write contact, element, energy, nodal, or diagnostic output to the output database. In
an ABAQUS/Standard analysis it is also used to write modal or radiation output to the output database. In
an ABAQUS/Explicit analysis it is also used to write incrementation output to the output database. The
*CONTACT OUTPUT, *ELEMENT OUTPUT, *ENERGY OUTPUT, *INCREMENTATION OUTPUT,
*MODAL OUTPUT, *NODE OUTPUT, and/or *RADIATION OUTPUT options can be used in conjunction
with this option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: History data
Level: Step
Using *OUTPUT in an ABAQUS/Standard analysis
References:
•
“Output to the output database,” Section 4.1.3 of the ABAQUS Analysis User’s Manual
•
“ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the ABAQUS Analysis User’s Manual
•
“Overview of job diagnostics,” Section 23.1 of the ABAQUS/CAE User’s Manual
•
*CONTACT OUTPUT
•
*ELEMENT OUTPUT
•
*ENERGY OUTPUT
•
*MODAL OUTPUT
•
*NODE OUTPUT
•
*RADIATION OUTPUT
•
*TIME POINTS
One of the following mutually exclusive parameters is required:
DIAGNOSTICS
Set DIAGNOSTICS=YES (default) to indicate that detailed diagnostic information should be
written to the output database. Set DIAGNOSTICS=NO to suppress the output.
FIELD
Include this parameter to indicate that the output requests used in conjunction with the *OUTPUT
option will be written to the output database as field-type output.
15.3–1
ABAQUS Version 6.1 Module: ID:
Printed on: