ABAQUS Volume II: I–Z - Manual (Page 43)

*INCIDENT WAVE FLUID PROPERTY
9.9 *INCIDENT WAVE FLUID PROPERTY: Define the fluid properties associated with an
incident wave.
The preferred interface for defining the fluid properties for an incident wave is the *INCIDENT WAVE
INTERACTION PROPERTY option used in conjunction with the *INCIDENT WAVE INTERACTION
option. The alternative interface uses the *INCIDENT WAVE FLUID PROPERTY option to define the fluid
properties used to define an incident wave. The alternative interface will be removed in a subsequent release.
The *INCIDENT WAVE FLUID PROPERTY must be used in conjunction with the *INCIDENT WAVE
PROPERTY option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
•
“Acoustic medium,” Section 20.3.1 of the ABAQUS Analysis User’s Manual
•
“Acoustic loads,” Section 27.4.5 of the ABAQUS Analysis User’s Manual
•
*INCIDENT WAVE PROPERTY
There are no parameters associated with this option.
Data line to define incident wave fluid properties:
First (and only) line:
1. , the fluid bulk modulus.
2. , the fluid mass density.
9.9–1
ABAQUS Version 6.1 Module: ID:
Printed on: