ABAQUS Volume II: I–Z - Manual (Page 278)

*PLASTIC
2. Plastic strain.
3. Temperature, if temperature dependent.
Repeat this data line a maximum of two times to define linear kinematic hardening independent of
temperature. Repeat this set of data lines as often as necessary to define a variation of the linear
kinematic hardening modulus with respect to temperature.
Data line for HARDENING=JOHNSON COOK:
First (and only) line:
1. A.
2. B.
3. n.
4. m.
5. Melting temperature, .
6. Transition temperature, .
Data lines for HARDENING=USER with PROPERTIES:
First line:
1. Give the hardening properties, eight per line.
Repeat this data line as often as necessary to define all hardening properties.
16.12–4
ABAQUS Version 6.1 Module: ID:
Printed on: