ABAQUS Volume II: I–Z - Manual (Page 273)

*PLANAR TEST DATA
3. Nominal transverse strain, . Default is zero. Not needed if the POISSON parameter is
specified on the *HYPERFOAM option.
Repeat this data line as often as necessary to give the stress-strain data.
Using planar test data to define the Mullins effect material model
References:
•
“Mullins effect in rubberlike materials,” Section 17.6.1 of the ABAQUS Analysis User’s Manual
•
“Energy dissipation in elastomeric foams,” Section 17.6.2 of the ABAQUS Analysis User’s Manual
•
*MULLINS EFFECT
There are no parameters associated with this option.
Data lines to specify planar test data for defining the unloading-reloading response of the
Mullins effect material model:
First line:
1. Nominal stress, .
2. Nominal strain in the direction of loading, .
Repeat this data line as often as necessary to give the stress-strain data.
16.11–3
ABAQUS Version 6.1 Module: ID:
Printed on: