ABAQUS Volume II: I–Z - Manual (Page 429)

*SIMPLE SHEAR TEST DATA
18.18 *SIMPLE SHEAR TEST DATA: Used to provide simple shear test data.
This option is used to provide simple shear test data. It can be used only in conjunction with the
*HYPERFOAM option.
Products: ABAQUS/Standard ABAQUS/Explicit
Type: Model data
Level: Model
References:
•
“Hyperelastic behavior in elastomeric foams,” Section 17.5.2 of the ABAQUS Analysis User’s Manual
•
*HYPERFOAM
There are no parameters associated with this option.
Data lines to specify simple shear test data for a hyperfoam:
First line:
1. Nominal shear stress, .
2. Nominal shear strain, .
3. Nominal transverse stress, (normal to edge with shear stress). This stress value is optional.
Repeat this data line as often as necessary to give the stress-strain data.
18.18–1
ABAQUS Version 6.1 Module: ID:
Printed on: