ABAQUS Volume II: I–Z User Manual

Page 494

Text mode
Original mode

*SUBSTRUCTURE MATRIX OUTPUT

Set OUTPUT FILE=USER DEFINED to write the results to a user-specified file in the

format of the *USER ELEMENT, LINEAR option (“User-defined elements,” Section 26.15.1 of
the ABAQUS Analysis User’s Manual). The name of the file is specified using the FILE NAME
parameter.

Set OUTPUT FILE=ODB to write the data to the output database (.odb) file.

RECOVERY MATRIX

Set RECOVERY MATRIX=YES to write the substructure recovery matrix (only available if the
recovery matrix is requested with the *SUBSTRUCTURE GENERATE option). The default is
RECOVERY MATRIX=NO.

SLOAD

Set SLOAD=YES to write the substructure load case vectors. The default is SLOAD=NO.

STIFFNESS

Set STIFFNESS=YES to write the substructure stiffness matrix. The default is STIFFNESS=NO.

There are no data lines associated with this option.

18.43–2

ABAQUS Version 6.1

Module: ID:

Printed on: