Fortinet 100A - Manual (Page 241)

Users and authentication peer
FortiGate-100A Administration Guide 01-28007-0068-20041203
241
To delete a user group
You cannot delete a user group that is included in a firewall policy, a dialup user
phase 1 configuration, or a PPTP or L2TP configuration.
1 Go to User > User Group.
2 Select Delete beside the user group that you want to delete.
3 Select OK.
CLI configuration
This guide only covers Command Line Interface (CLI) commands that are not
represented in the web-based manager. For complete descriptions and examples of
how to use CLI commands see the FortiGate CLI Reference Guide.
peer
Use this command to add or edit the peer certificate information.
Command syntax pattern
config user peer
edit
set
config user peer
edit
unset
config user peer
delete
get user peer []
show user peer []
Example
This example shows how to add the branch_office peer.
radius command keywords and variables
Keywords and variables Description Default Availability
ca Enter the peer Certificate Authority
(CA).
No default. All models.
cn Enter the peer certificate common
name.
No default. All models.
cn-type {FDQN | email
| ipv4 | string} Enter the peer certificate common
name type.
string All models.
subject Enter the peer certificate name
constraints.
No default. All models.