FUJITSU 200 User Manual
Page 21
PenCentra 200 Hardware Features
9
Modem Jack
Connect a telephone line to the internal
international software modem using a standard
RJ-11 telephone plug. The modem is only certified
on North American, French, German, and United
Kingdom models of the PenCentra 200.
Suspend/
Resume Button
Allows you to suspend and resume system
operation.
High-Usage
Contacts
Used when the PenCentra is installed in an
approved optional docking device. The contacts
allow system access via PS/2 keyboard, USB-Host,
RS-232C serial input, and DC input.
PS/2-Style Port
Allows the connection of a 5-volt PS/2-style
keyboard, mouse, or barcode reader. Note that the
system must be suspended prior to installing a
device to this port.
DC Input
Connect an external power source such as the AC
Adapter or the optional Auto Adapter.
USB Port
Connect Universal Serial Bus-compliant devices
Headphone Jack
Connect mono headphones or powered external
speakers. The internal speaker is disabled when
you plug in external headphones or speakers.
Serial Port
Connect an external device with a serial interface.
Primarily used to connect the synchronization cable
between the PenCentra 200 and your desktop
system. (Note that this icon appears on the inside
of the serial port door). Pin 9 of the serial port
supports 5-volt, 500 mA maximum current.
Table 1-2 Peripheral Connectors (Continued)
Connector/
Peripheral
PenCentra 200
Icons
Purpose