FUJITSU 200 - Manual (Page 20)

8 Introducing the PenCentra 200 H/PC Pro
Connectors and Peripheral Interfaces 1
The connectors and peripheral interfaces on the PenCentra 200 can accommodate a
variety of different devices. Figures 1-1 and 1-2 show the locations of the connectors
and interfaces on the PenCentra 200, as described in Table 1-2.
Table 1-2 Peripheral Connectors
Connector/
Peripheral
PenCentra 200
Icons
Purpose
Microphone Jack Connect an external microphone. The internal
microphone is disabled when you plug in an
external microphone.
Record Button Initiates the recording of audio files (such as voice
memos) on the PenCentra.
Notification
Button The notification button is used to turn off the
notification indicator, and launch the message that
generated the notification.
Kensington Lock The Kensington TM Microsaver security slot allows
you to secure the PenCentra using
Kensington-compatible locking devices.
PC Cards Install one or two Type II PCMCIA Cards. If only
one card is installed, either slot can be used.
IrDA Port The infrared transceiver built into the PenCentra
allows you to communicate with other devices that
are compliant with IrDA Standard Revision 1.0 or
1.1. Effective range for infrared communication is
about three feet, and within 15 degrees off of
center. A clear line-of-sight path must exist between
the IrDA port on the PenCentra and the IrDA
transceiver on the other device.