Charging the battery – Hitachi SH-G1000 User Manual
Page 28
Section 2: Understanding Your Device
20
2A: Your PCS Phone – The Basics
Charging the Battery
Use one of the following two methods for charging the battery:
Ⅵ
Connect the supplied AC adapter and cradle as shown below, and then
attach the device onto the cradle. For information on using the cradle,
see “USB Cradle” on page 30.
- or -
Ⅵ
Connect the supplied AC adapter to the device as shown below.
The LED for Charging lights amber while charging is being performed.
The LED turns green when charging is completed. For more information
about the LED for Charging, see “LEDs” on page 29.
It takes approximately three hours to finish charging a battery that has
only enough power for data backup, but not enough for operation.
LED for charging