Hitachi SH-G1000 User Manual

Page 191

183

2L: Backing Up Data

Note:

When backing up data using the same medium again, specify the

same folder name. If you select a folder not generated for backing up, all
data in the folder will be lost.

Note:

If you check the box for Use Password, backed up data cannot be

restored unless a correct password is entered. A password can be
composed of 1 to 8 digits. You can enter A to Z, a to z, and 0 to 9.

After a confirmation message appears, tap

Yes

to start data backup.

Note:

Do not operate the device until backup is completed.

Tip:

To conserve battery strength, it is recommended to use the AC

adapter when executing data backup.

Note:

Use a memory card that has about twice as much capacity as the

in-use area size of the data storage area.

Restoration Procedure

Initialize the device. For the initialization method, see “Initialization”
on page 26.

Insert a memory card containing backup data into the device, and
then switch the device on.

Tap ,

Programs

, and

Data Backup

Select

Restore

, then tap

Next