HP TX1000 - Manual (Page 85)

System Configuration menu
Select To do this
Language Support Change the Setup Utility language.
Enhanced SATA support (select models only) Enable/disable enhanced SATA mode.
Boot Options Set the following boot options:
● f10 and f12 Delay (sec.)―Set the delay for the f10 and
f12 functions of the Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
● CD-ROM boot―Enable/disable boot from CD-ROM.
● Floppy boot―Enable/disable boot from Floppy.
● Internal Network Adapter boot―Enable/disable boot
from Internal Network Adapter.
● Boot Order―Set the boot order for:
● USB Floppy
● ATAPI CD/DVD ROM Drive
● Hard drive
● USB Diskette on Key
● USB Hard drive
● Network adapter
Button Sound (select models only) Enable/disable the Quick Launch Button tapping sound.
Video memory up to (select models only) Select the amount of video memory.
Diagnostics menu
Select To do this
Hard Disk Self Test Run a comprehensive self-test on the hard drive.
NOTE: On models with two hard drives, this menu
option is called the Primary Hard Disk Self Test.
Secondary Hard Disk Self Test (select models only) Run a comprehensive self-test on a secondary hard drive.
80 Chapter 6 Setup Utility ENWW