HP TX1000 - Manual (Page 42)

Pen
Description Spare part number
Pen 441147-001
Before removing the pen, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power cord.
4 . Remove the battery (see Battery on page 36 ).
Remove the pen:
1 . Position the computer with the left side toward you.
2 . Press in on the pen (1) to release it from the pen holder.
3 . Remove the pen (2) from the pen holder.
Reverse this procedure to install the pen.
ENWW Component replacement procedures 37