HP TX1000 - Manual (Page 57)

Display assembly
Description Spare part number
12.1-inch, WXGA, BrightView, touch screen display assembly with Web camera,
fingerprint reader, and WWAN and WLAN antenna cables
441114-001
12.1-inch, WXGA, BrightView, touch screen display assembly with Web camera and
WWAN and WLAN antenna cables
441112-001
12.1-inch, WXGA, BrightView, touch screen display assembly with fingerprint reader and
WWAN and WLAN antenna cables
441113-001
12.1-inch, WXGA, BrightView, touch screen display assembly with WWAN and
WLAN antenna cables
441111-001
12.1-inch, WXGA, BrightView, display assembly with Web camera, fingerprint reader,
and WWAN and WLAN antenna cables
441110-001
12.1-inch, WXGA, BrightView, display assembly with Web camera and WWAN and
WLAN antenna cables
441108-001
12.1-inch, WXGA, BrightView, display assembly with fingerprint reader and WWAN and
WLAN antenna cables
441109-001
12.1-inch, WXGA, BrightView, display assembly with WWAN and WLAN antenna cables 441107-001
12.1-inch, WXGA, BrightView, touch screen display assembly with Web camera,
fingerprint reader, and WLAN antenna cable
441106-001
12.1-inch, WXGA, BrightView, touch screen display assembly with Web camera and
WLAN antenna cable
441104-001
12.1-inch, WXGA, BrightView, touch screen display assembly with fingerprint reader and
WLAN antenna cable
441105-001
12.1-inch, WXGA, BrightView, touch screen display assembly with WLAN antenna cable 441103-001
12.1-inch, WXGA, BrightView, display assembly with Web camera, fingerprint reader,
and WLAN antenna cable
441102-001
12.1-inch, WXGA, BrightView, display assembly with Web camera and WLAN antenna
cable
441100-001
12.1-inch, WXGA, BrightView, display assembly with fingerprint reader and WLAN
antenna cable
441101-001
12.1-inch, WXGA, BrightView, display assembly with WLAN antenna cable 441099-001
Before removing the display assembly, follow these steps:
1 . Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2 . Disconnect all external devices connected to the computer.
3 . Disconnect the power cord.
4 . Remove the battery (see Battery on page 36 ).
5 . Disconnect the wireless antenna cables from the WWAN module (see WWAN module
on page 40 ).
6 . Remove the memory module compartment cover (see Memory module on page 43 ).
52 Chapter 5 Removal and replacement procedures ENWW