Wlan module – HP TX1000 User Manual
Page 49
6
.
Pull the module (2) away from the socket at an angle and remove it.
NOTE:
Memory modules are designed with a notch (3) to prevent incorrect installation into
the memory module socket.
Reverse this procedure to install a memory module.
WLAN module
Description
Spare part number
802.11a/b/g WLAN module for use in Canada and the United States
407160-001
802.11a/b/g WLAN module for use in the ROW countries or regions listed below:
China, Ecuador, Haiti, Honduras, Pakistan, Peru, Qatar, South Korea, Uruguay, Venezuela
407160-002
802.11a/b/g WLAN module for use in Japan
407160-291
802.11b/g WLAN module for use in the MOW countries or regions listed below:
Argentina, Brazil, Canada, Chile, Mexico, Taiwan, the United States
407159-001
802.11b/g WLAN module for use in the ROW countries or regions listed below:
China, Ecuador, Haiti, Honduras, Pakistan, Peru, Qatar, South Korea, Uruguay, Venezuela
407159-002
Before removing the WLAN module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
).
44 Chapter 5 Removal and replacement procedures
ENWW