beautypg.com

HP TX1000 User Manual

Page 72

background image

3

.

Remove the ExpressCard slot bezel (4) from the ExpressCard slot.

NOTE:

The ExpressCard slot bezel is included in the Plastics Kit, spare part number

441138-001.

4

.

Use the optical drive connector (1) to lift the left side of the system board (2) until the power connector

(3) is clear of the base enclosure.

5

.

Pull the system board (4) away from the top cover at an angle and remove it.

Reverse this procedure to install the system board.

ENWW

Component replacement procedures 67