HP TX1000 - Manual (Page 13)

Front components
Item Component Function
(1) Display release latch Opens the computer.
(2) Power switch* ● When the computer is off, slide the power switch to the
right to turn on the computer.
● When the computer is on, slide the power switch to the
right to initiate Sleep.
● When the computer is in the Sleep state, slide the
power switch to the right briefly to exit Sleep.
● When the computer is in Hibernation, slide the power
switch to the right briefly to exit Hibernation.
If the computer has stopped responding and Windows
shutdown procedures cannot be used, slide the power
switch to the right and hold for at least 5 seconds to turn off
the computer.
(3) Power light ● On: The computer is on.
● Blinking: The computer is in the Sleep state.
● Off: The computer is off or in Hibernation.
(4) Consumer infrared lens Receives a signal from the HP Remote Control.
(5) Audio-out (headphone) S/PDIF jack (select models only) Provides enhanced audio performance, including surround
sound and other high-end audio output.
(6) Audio-out (headphone) jack Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, a headset, or television
audio.
(7) Audio-in (microphone) jack Connects an optional computer headset microphone, stereo
array microphone, or monaural microphone.
(8) Wireless switch Turns the wireless feature on or off, but does not create a
wireless connection.
NOTE: A wireless network must be set up in order
to establish a wireless connection.
8 Chapter 2 External component identification ENWW