HP TX1000 - Manual (Page 63)

25 . If it is necessary to replace the Web camera, disconnect the camera cable (1) from the camera
module.
26 . Remove the camera module (2) from the display enclosure.
NOTE: The Web camera is available using spare part number 441120-001.
27 . If it is necessary to replace the display LED board, remove the two Phillips PM2.0×4.0 screws (1)
that secure the display LED board to the to the display enclosure.
28 . Release the display LED board (2) as far as the display LED board cable will allow.
29 . Disconnect the display LED board cable (3) from the display LED board.
NOTE: The display LED board is available using spare part number 441123-001.
30 . Remove the display LED board from the display enclosure.
31 . If it is necessary to replace the display QuickPlay board, remove the two Phillips PM2.0×4.0 screws
(1) that secure the display QuickPlay board to the display enclosure.
58 Chapter 5 Removal and replacement procedures ENWW