HP 1230 SERIES - Manual (Page 49)

6
43
additional setup information
This section describes how to set the language, country/region, and how to set
up your HP Fax with other office equipment. The standard installation instructions
are provided in your Setup Poster, we recommend keeping it for later use.
set the language and country/region
Usually, you set the language and country/region the first time you turn the
HP Fax on. If you would like to change the country/region or language, use the
following procedure.
Tip — If you are unable to read the front-panel display language,
but need to reset it, press Setup, 5, 5. Follow the onscreen
instructions.
1 Press Setup until 5:Maintenance appears, and then press Enter.
2 Press until 5:Set Language & Country/Region appears, and then press
Enter.
3 Watch the display until the desired language appears. Enter the language
code on the keypad. Press 1 for yes or 2 for no when the display asks you
to confirm your selection.
After the language is selected, you are prompted with all the countries/
regions for that selected language.
4 Watch the display until the desired country/region appears. Enter the
country/region code on the keypad. Press 1 for yes or 2 for no when the
display asks you to confirm your selection.
Confirm the country/region and language by printing a self-test report.
1
Press Setup until 1:Print Report appears, and then press Enter.
2 Press until 5:Self-Test Report appears, and then press Enter.
connect your hp fax to a phone, modem, or answering
machine
This section explains how to connect your HP Fax to various office devices:
•
phone: connect a phone to the HP Fax so it can use the same phone
connection as the fax line
• modem: connect a modem to your HP Fax so it can use the same phone
connection
• answering machine: set your HP Fax to direct voice calls to the answering
machine and fax calls to the HP Fax