HP 1230 SERIES - Manual (Page 36)

hp fax 1230 series
use the fax features
30
3 When you answer a phone and hear fax tones, press 1 2 3 to begin
receiving the fax. Or, once Phone off-hook is displayed on the front panel,
you can press Start, Black or Start, Color.
Note: Once the HP Fax receives the fax call, the telephone will go silent. At
this point, hang up your phone.
answer fax calls when you use voice mail on the same phone line
Some voice mail systems have the capability to forward incoming fax calls to
your HP Fax. If your voice mail system has this capability, your HP Fax can
answer fax calls automatically. Refer to the documentation provided by your
voice mail system to find out if it has this feature.
Or, if you subscribe to a distinctive-ring service through your phone company,
your HP Fax will be able to distinguish between voice and fax calls, and answer
fax calls automatically. For information, see change the answer ring pattern
(distinctive ringing) on page 26.
If you don't have the voice mail forwarding feature or distinctive ring, you must
be available to respond in person to incoming fax calls, or your HP Fax cannot
receive faxes. If you do not respond to a fax call, it will be recorded as a voice
mail message.
Use the instructions below to set up your HP Fax to manually receive faxes.
1
Press the Auto Answer button to turn off the Auto Answer feature (the Auto
Answer light will go off).
2 When you answer a phone and hear fax tones, press 1 2 3 to begin
receiving the fax. Or, once Phone off-hook is displayed on the front panel,
you can press Start, Black or Start, Color.
Note: Once the HP Fax receives the fax call, the telephone will go silent. At
this point, hang up your phone.
answer fax calls when you use an answering machine on the same line
If you use an answering machine on the same phone line as your HP Fax, we
recommend that you connect it directly to the HP Fax so that you can receive
faxes automatically. If you choose not to directly-connect your answering
machine, you must be available in person to receive incoming faxes manually.
Refer to the following sections for the instructions that apply to your answering
machine setup.
to answer calls with an answering machine connected directly to your hp fax
1 Verify that Auto Answer is enabled. (The light next to Auto Answer is on
when the feature is enabled. Press the Auto Answer button to turn the
feature on or off.)
2 Set the Rings to Answer on the HP Fax to a setting greater than the number
of rings selected for your answering machine. For more information, see set
the rings to answer setting on page 23. This is so that the answering
machine will pick up first, and the HP Fax can “listen” for fax tones. If the
HP Fax detects fax tones, it will take over the call; if there are no fax tones,
the answering machine will record the voice message. The HP Fax is
factory-set to answer after 5 rings.