HP 1055CMHP - Manual (Page 99)

Service Tests and Utilities
4-25 HP DesignJets 1050C and 1055CM Printers Service Manual
Service Utilities
The following is a list of all internal Service Utilities available in the
Printers. Instructions for entering the Service Utilities menu are
given on Page 4-26.
1 Tubes Purge
⇒
Page 4-28
The purpose of this Service Utility is to Prime the Tubes when a
new Tubes System has been installed.
2 Release Info
⇒
Page 4-32
This Service Utility provides information on the current Firmware
version.
3 Set Asian PS Font
⇒
Page 4-33
The purpose of this Service Utility is to set the Asian Fonts after
replacing the Hard Disk Drive.
4 Printer Model Type
⇒
Page 4-35
The purpose of this Service Utility is to set the correct Printer
Model.
5 Overdrive Cleaning
⇒
Page 4-37
The purpose of this Service Utility is to rotate the Overdrive in order
to clean it.
6 EEROM Utilities
⇒
Page 4-38
The purpose of this Service Utility is to either clear the EEROM or
to test it.
7 Printhead Check
⇒
Page 4-41
This Service Utility allows you to have the Printhead checking
facility ON or OFF.
8 Mon. Mode Baud Sel.
⇒
Page 4-42
This Service Utility allows you to change the Baudrate of the Serial
Port.