HP 1055CMHP User Manual
Page 39
System Error Codes
2-5
HP DesignJets 1050C and 1055CM Printers Service Manual
System Error:
010040
Problem
Description:
Error in Paper-axis Encoder quadrature.
Corrective Action:
Try the following:
n
Check that the Paper-Axis Motor cable is NOT broken or
damaged.
n
Check that the Paper-Axis Motor cable is correctly connected.
n
Replace the Paper-Axis Motor
⇒
Page 8-12.
n
If the Error Code continues, replace the Electronics Module
⇒
Page 8-25.
WARNING
Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error:
010041
Problem
Description:
Error in Scan-axis Encoder quadrature.
Corrective Action:
Try the following:
n
Check that the Encoder Strip is NOT broken or damaged.
n
Replace the Encoder Strip
⇒
Page 8-34.
n
Replace the Carriage Assembly
⇒
Page 8-44.
n
If the Error Code continues, replace the Electronics Module
⇒
Page 8-25.
WARNING
Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.