HP 1055CMHP User Manual
Page 55
System Error Codes
2-21
HP DesignJets 1050C and 1055CM Printers Service Manual
System Error:
0B0009
Problem
Description:
Unable to detect Aerosol Fan (Included on the Right Cover).
Corrective Action:
Try the following:
n
Make sure that the Aerosol Fan is connected correctly to the
Electronics Module.
n
Turn the Printer OFF and disconnect the Aerosol Fan from the
Electronics Module. Connect a New Aerosol Fan (comes with the
new Right Cover) to the Electronics Module and power ON the
Printer. If the New Aerosol Fan functions correctly without any
Error Codes then remove the Old Aerosol Fan from the Printer
and install the New one.
n
If the New Aerosol Fan does not function correctly either, then
replace the Electronics Module
⇒
Page 8-25.
System Error:
0B000A
Problem
Description:
Primer Shutdown Error.
Corrective Action:
Try the following:
n
Check that the Primer Stepper-Motor Cable is NOT broken or
damaged and that the Primer arm moves freely from side to side.
n
Replace the Service Station
⇒
Page 8-8.
n
If the Error Code continues, replace the Electronics Module
⇒
Page 8-25.
WARNING
Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.