HP 1055CMHP User Manual

Page 121

Text mode
Original mode

Service Calibrations

5-5

HP DesignJets 1050C and 1055CM Printers Service Manual

5 Use the Arrow keys to scroll through the "Service Calibrations"

selections.

6 Press the Enter key to begin a specific calibration when the

required Service Calibration is highlighted.

NOTE

If the printer is not used for 3 minutes, the printer exits out of the
Service Calibrations Menu and you must repeat the above steps
to enter Service Calibrations again.

NOTE

In some cases a quick press of a button may not be recognized by
the Printer. When pressing a button, be sure to press it
deliberately and all the way to the bottom of its travel.

NOTE

If the Printer hangs up during an operation, switch the Printer
OFF and restart from step 1.

Service Calibrations

3. Service station...

2. Line sensor cal...

4. Roller mark position...

5. Pen to Paper Spacing...

1. Accuracy cal...