HP 1055CMHP - Manual (Page 272)

Removal and Installation
8-64
HP DesignJets 1050C and 1055CM Printers Service Manual
Paper Entry Assembly
Refer to Figure 69 to Figure 71.
Removal
WARNING Switch off the printer and remove the power cord.
1. 1.Remove the following:
1. "Left Hand Cover" see page 8-13.
2. "Left Hand Trim" see page 8-18.
3. "Ink Supply System Assembly" see page 8-19.
4. "Clutch Assembly and Miscellaneous Parts" see page 8-21.
2. Remove the T-15 screws (item 2) securing the entry roller (item 1)
to the left hand chassis (refer to Figure 69). Pull out the left side of
the entry roller first and then remove completely.
Figure 69: Entry Roller
C607423
2
1