Left and right rear covers – HP 1055CMHP User Manual

Page 232

Removal and Installation

8-24

HP DesignJets 1050C and 1055CM Printers Service Manual

Left and Right Rear Covers

Refer to Figure 22.

Removal

WARNING

Switch off the printer and remove the power cord.

NOTE

Working from the rear of the Printer.

1. Remove the T-10 Screw (Item 1) that attaches the left hand rear

cover (Item 2) to the Printer.

2. Release the left hand rear cover (Item 2) from the retaining clip

(item 3) that attaches the ferrite (item 4) to the rear cover.

3. Remove the T-10 Screw (Item 5) that attaches the right hand rear

cover (Item 6) to the Printer.

4. Release the right hand rear cover (Item 6) from the retaining clip.

Figure 22: Left and Right Rear Covers