Utilities, To add a test code i.d. prefix to all symbologies, Show decoder revision – HandHeld Entertainment Document Reader 4800dr User Manual
Page 99: Show engine revision, Show scan driver revision, Show software revision, Chapter 9 - utilities
4800dr Barcode Guide
9 - 1
9
Utilities
To Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded symbology. (See the Symbology Chart,
, page A-1) for the single character code that identifies each symbology.) This action first clears all
current prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary setting that will be removed when the
unit is power cycled.
Show Decoder Revision
Scan the barcode below to output the decoder revision.
Show Engine Revision
Scan the barcode below to output the engine revision. The engine type, revision number, and status character [ACK] are
returned.
Show Scan Driver Revision
Scan the barcode below to output the scan driver revision. The scan driver controls image capture.
Show Software Revision
Scan the barcode below to output the current software revision, unit serial number, and other product information.
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Decoder Revision
Show Engine Revision
Show Scan Driver Revision
Show Software Revision